3
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION ENCLOSURE REQUIREMENTS
• The floor on which the dual refrigerator will be installed must be capable of
bearing a minimum of 2,400 pounds (1,089 kg).
• The kitchen floor and bottom of the product must be level. Otherwise, air flow for
the unit's cooling system may be impeded or reduced. Use a level to be sure.
• There must be no objects preventing installation of the product to the back and
side walls of the product's cut-out installation area.
• Cut-out dimensions of the cabinets where the product will be installed must be in
strict conformity with the dimensions given in the manual.
• Do not install the refrigerator directly adjacent to another refrigerator. Otherwise,
condensation and damage may occur
• The installation area must not be subjected to direct sunlight and it must be away
from heat sources, such as microwaves, ovens, radiators, etc.
• The ambient temperature must be between 61°F (16°C) and 100°F (38°C),
depending on where the unit is installed. Otherwise, function errors may occur
when the product is running.
• If it is not possible to avoid installing the product near a heat source, the minimum
clearances given below must be maintained:
• 1 3/16" (30 mm) from electric ranges or ovens.
• 12" (305 mm) from gas or fuel operated ranges or ovens.
• The dedicated circuit breaker for this unit must be easily accessible in case of an
emergency; it must not be hidden behind the product.
• The electrical plugs and cords must not touch the back surface of the product.
Otherwise, they may get damaged due to the vibration of the product.
• If the humidity level is high where the product is used, corrosion may occur on the
outer surface of the product. Keep the area where the unit will be installed dry and
well-cleaned to avoid corrosion.
Pr
eparing th
e R
efriger
ator Enclosur
e
