15
ADJUSTING THE REFRIGERATOR HEIGHT
• With the dual unit now pushed into the cabinet, the feet need to be raised in order to
secure the product to the anti-tip brackets.
• You may use a drill with a 1/4" hex bit or a socket wrench to adjust leg height; we
recommend using a socket wrench by hand to avoid the risk of stripping the legs.
It's important to raise the front feet first to reduce risk of the appliance falling
frontward, which would increase the risk of injury.
A/D
— Turn the key clockwise to lift the front
B/C
— Turn the key clockwise to lift the rear
• After adjusting the feet, check if both RBIV-30 units are level in both width and depth
directions. You may readjust as needed after panels are installed.
• The maximum height the adjustable feet can reach is 1 9/16" (40 mm), and the
maximum product height is 85 3/8" (2,169 mm).
WARNING
INSTALLATION
Leveling Both Units
