9
©2019 Guangzhou ZHIYUAN Electronics
Date: 2019/01/17
User Manual
V1.00
C
Guangzhou ZHIYUAN Electronics Co., Ltd.
ZDS2000B Series Oscilloscope User Manual
Chapter 2:Product Introduction
2.1 Main Features of 4-channel ZDS2000B Oscilloscopes
200MHz bandwidth, 2GSa/s sampling rate.
Equipped with 250Mpts mass memory depth.
Equipped with 11 kinds of basic trigger, 22 kinds of protocol trigger and 29 kinds
of protocol decoding.
Equipped with 150K wfm/s waveform refresh rate.
4Mpts FFT analysis function.
51 kinds of true parameters measurement and statistics. Through FPGA full
hardware parallel processing, waveforms in full memory depth can be measured
based on the original sampling point.
Waveform search function
. It supports multiple search criteria, such as edge,
pulse width, runt, rising/falling time, period/frequency, and duty cycle. Combined
with
“ZOOM” and “Large Knob” function, you can quickly view and locate
abnormal signals.
Waveform play function.
In ZOOM mode, use the waveform play function to
quickly browse the whole waveform signal, trends, etc.
Analysis function.
ZDS2000B oscilloscope comes with segmented storage
function, Digital filtering function and Wave Analyze waveform comprehensive
analysis software functions, etc. It can help analyze the waveform signal and
locate the problem quickly.
9-inch TFT color
touch
screen with 800×480 resolution. It has optimized 256
gray levels display.
Support USB Host, USB Device, LAN and RS232 interface as well as SCPI,
which provide rich communication interfaces for secondary programming control.
2.2 Panel Introduction
2.2.1
Front Panel/Rear Panel Description
ZDS2000B series oscilloscope with a touch screen can be operated by using full-screen
touch, and it is easy to operate. Take the ZDS2024B Plus digital oscilloscope as an
example .The front panel of ZDS2024B Plus digital oscilloscope is shown in Figure
2-1,including buttons/knobs and I/O interface, and their functions are described in Table
