M.2CANFD
M.2 Interface CAN (FD) Card
©2022 Guangzhou ZLG Electronics Co., Ltd.
10
User Manual
M.2CANFD series interface cards do not have any switches and jumpers for assigning
interrupts and I/O addresses, which are automatically assigned by the computer BIOS.
Therefore, the board must be installed in the M.2 slot before you install the driver. Figure
2.3 shows the installation procedure:
1. Power off the computer and open the computer case cover;
2. Insert the end of the M.2CANFD series interface card diagonally upward into the free
M.2 slot, and then gently press it down;
3. Tighten the screws to fix the board;
4. Power on the computer. At this time, the BIOS automatically assigns interrupts and I/O
addresses to the M.2CANFD interface card;
5. Install the driver.
Figure 2.4 M.2CANFD installation diagram (similar to MiniPCIeCANFD)
