CANSwitch-AF2S2
High-Performance Dual-CAN to Fiber Switch User Manual
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
15
User Manual
to use. Its related information is available at http://www.zlg.cn.
Note: For details about how to use the CANTest software, see
ZLG Electronics CAN Test Software
and Interface Function User Manual
.
First, connect the CANSwitch-AF2S2 device to the PC by using an optical cable, and
connect the CANSwitch-AF2S2 device to the USBCAN interface card by using a twisted
pair cable (CANH is connected, and CANL is connected. Configure a 120-ohm terminal
resistance). Then, connect the USBCAN interface card with the PC by using a USB cable.
Finally, connect power to the USBCAN interface card and the CANSwitch-AF2S2 device.
Run the CANtest software on the PC (as shown in Figure 3.7). The CANtest test software
is available on http://www.zlg.cn/ (installation required).
Figure 3.7 Software used to test communication
After starting CANtest, select a device type. Here we use USBCAN-EU as an
example. First, we select USBCAN-EU, as shown in Figure 3.8. Then, select the "Open
Device" menu in the "Device Operation" main menu to display the device's parameter
setting interface. Pay attention to the baud rate. Click OK and start CAN, as shown in
Figure 3.9.
Figure 3.8 Selecting a device type
