CANDTU-400ER
CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
16
User Manual
corresponding CAN channel.
5) Custom baud rate
If the provided common CAN communication baud rate cannot meet the
requirements, select the custom baud rate check box and enter the baud rate.
6) Record error frames
Selected: Record CAN error frames.
Deselected: CAN error frames will not be recorded.
4.3.2 Filtering
Figure 4.7 Filter Settings Tab
The configuration tool supports a maximum of 64 filtering rules per channel. Filter
configurations based on the ID. Support channel independent enable filter and filter mode.
When the blacklist is selected, the device does not receive the ID packets added in
the list. When the whitelist is selected, the device only receives ID packets added in the
list.
The Filter tab contains the following parameters:
Filter modes: blacklist, whitelist
Start and end frame IDs
Mode selection: standard frame single ID, standard frame group ID, extended
