5 Function Setting
35
record volume is large, so it is necessary to select “Linear” to achieve good effect of
recording.
5.2.2
5.2.2
5.2.2
5.2.2 PTZ
PTZ
PTZ
PTZ Setting
Setting
Setting
Setting
The camera is used together with a PTZ to monitor a large range of 90 degrees
vertically and 335 degrees horizontally, so as to expand the monitoring area of a
single camera. The PTZ can be controlled by setting the address code, control
protocol and 485 port.
Address
Address
Address
Address Code
Code
Code
Code
: It is used for identification among several PTZs and employs the
internal code to change the address code, and match the set address code with the
PTZ address code. Do not cause any conflict among PTZ address codes.
☺
Notice
Notice
Notice
Notice
: Due to different production criteria of manufacturers, the address
codes may not agree with each other completely. If not, change the address
code by +1 or -1 to achieve the complete match.
Summary of Contents for ZKIR
Page 5: ...Table of Contents III 7 1 Appendix 1 Terminologies 66 7 2 Appendix 2 Default Parameters 70...
Page 6: ......
Page 63: ...5 Function Setting 57 2 Input all information and follow step by step with DynDNS...
Page 65: ...5 Function Setting 59 4 Type domain in the Hostname field and select sub domain...
