ZK-D1065/2180 User Manual
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
P a g e
|
26
7.11
Network Settings
In the main menu, select
Network
to open the network setting interface. Use the
“
” and “
” buttons to select the Device Name, Network Address, and Gateway
Address. Press
OK
enter the next digit or
ESC
set back the previous digit. After the
last digit is modified, press
OK
to save the settings. (This function is only available
for ZK-D2180)
Network
Name
F 0 0 0 0 1
IP
255.255.255.255
GWIP
192.168. 1. 1
Note:
1.
When the Network Address is 255.255.255.255, it is connected automatically.
You need to connect a network cable to obtain the IP. If the network cable is not
connected, the security gate will enable the backup parameters at this time:
Standby IP: 192.168.161.168
Backup Gateway: 192.168.161.1
2.
The default mask is 255.255.255.0. The default mask can be modified by using
the security gate networking software. The Data loss and factory reset
parameters will restore the default mask to 255.255.255.0.
