US1000/2000 User Manual
P a g e
| 9
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
3.
Wiring and Installation
3.1.
Wire Connection Definition
Number
Colour
Function
1
Red
Power +12V
2
Black
Ground
3
Write
Wiegand output D1
4
Green
Wiegand output D0
5
Black with Write
Ground
6
Brown
RS485+
7
Orange
RS485-
8
Purple
Trigger INT
9
USB Male Connector
USB Interface
10
RJ45 Female Connector
Network interface (Only TCP/IP models are supported)
3.2.
Installation
The reader is mounted on an object such as a rod or column by fixing the support part. The installation
height and angle can be adjusted according to the specific application scenario to achieve the best
recognition effect. The recommended installation height ranges from 2 to 2.5 meters and the angle
ranges from 60 to 75 degrees, as shown below.
Note:
Please install the reader as shown in the above picture. The facing direction of the reader and the
travel direction of the vehicle must be in a straight line.