ZKTeco TS2200 Series, User Manual

Page: 6 / 10

6
Drop-arm
electromagnet
Optical-coupling
blanking disc
Damping
accumulator
M
ax
im
um
st
re
ss
to
le
ra
nc
e:
40
kg
M
ax
im
um
st
re
ss
to
le
ra
nc
e:
80
kg
4. It is recommended that a warning sign is placed at a conspicuous position, and prompt: " Please swipe your card outside the
warning line and pass in order. Thank you! ”
The maximum tolerance of the tripod turnstile's arms
Please note that the maximum stress tolerance at the center of the arm is 80kg and at the ends of the arm is 40kg (See figure 5-1).When
the impact force on the tripod turnstile reaches the designed limit, the arms break down first to ensure that the whole equipment is not
damaged and the passer-by is not injured.
Figure 5-1
In case of emergencies
This equipment is designed to drop down arms automatically if there is power failure thus make the passage being open to the public.
And there is interface in the turnstile board to connect an emergency switch which would make the tripod turnstile keep open in case of
emergencies. Note after power restoration, wait for more than 6s and then lift the arms manually.
5.2 Maintenance
Forming maintenance consciousness
The tripod turnstile needs to be maintained regularly and repaired once it is damaged. It is recommended that warning signs being
placed at conspicuous positions for prompting passers-by to pass in a proper way and in good order. Reasonable maintenance
consciousness helps to guarantee long-term usage of the tripod turnstile.
Regular maintenance
Cleaning and protection liquid dedicated for stainless steel are recommended to wipe the outer shell of the equipment regularly. The
tripod turnstile used outdoors or in an environment with lots of dust must be maintained once a year at least. Note regular maintenance
should be performed after power off the equipment.
The damping accumulator is used to adjust the tripod turnstile's elasticity and return speed. You can rotate it in clockwise direction to
enhance and in anticlockwise direction to weaken the elasticity and return speed of the tripod turnstile. See figure 5-2.
Figure 5-3 shows the mechanical and electrical structure of this equipment.
Figure 5-2 Figure 5-3
Turnstile-opening
electromagnet
Lock rod
Trilobed wheel Lock rod
Turnstile-opening
electromagnet