ZKTeco SpeedFace-V3L User Manual Download Page 37

Page: 37 / 121

SpeedFace-V3L

User Manual

P a g e

| 36

on the authentication method(s) that the super administrator has registered.

6.1.3

Register Fingerprint

Tap

Fingerprint

in the

New User

interface to enter the fingerprint registration

page.



Select the finger to be enrolled.



Press the same finger on the fingerprint reader three times.



Green indicates that the fingerprint was enrolled successfully.

6.1.4

Face

Tap

Face

in the

New User

interface to enter the face registration page.



Please face towards the camera and place yourself in such a way that
your face image fits inside the white guiding box and stays still during
face registration.



A progress bar shows up while registering the face and then "

Enrolled

Summary of Contents for SpeedFace-V3L





















































































































Search results

Summary of Contents for SpeedFace-V3L

Reviews:

Related manuals for SpeedFace-V3L

Brands by name

Popular brands

ZKTeco SpeedFace-V3L, User Manual

Search results

Summary of Contents for SpeedFace-V3L

Reviews:

Related manuals for SpeedFace-V3L

Brands by name

Popular brands