SpeedFace-V3L
User Manual
P a g e
| 16
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Do not wear hats, masks, sunglasses or eyeglasses.
Be careful not to display two faces on the screen. Register one person
at a time.
It is recommended for a user wearing glasses to register both faces
with and without glasses.
Recommendation for authenticating a face
Ensure that the face appears inside the guideline displayed on the
screen of the device.
Sometimes, authentication may fail due to the change in the wearing
glasses then the one used while registration. In such a case, you may
require authenticating your face with the previously worn glasses. If
your face was registered without glasses, you should authenticate
your face without glasses further.
If a part of the face is covered with a hat, a mask, an eye patch, or
sunglasses, authentication may fail. Do not cover the face, allow the
device to recognize both the eyebrows and the face.
Standby Interface
4.4
After connecting the power supply, the following standby interface is
displayed: