12
15 Detection Management Settings
L
Click on
enter the
management interface
> [System] > [Detection Management]
to
detection
. You
can set the value of
High temperature alarm threshold
. The device will send an alarm prompt when
the temperature of the user detected exceeds this value. When the
Temperature over the range
;
access denied
is enabled, the user will be forbidden to access, as shown in the following figure.
Temperature over the range; access denied
Deny access without mask
Enable mask detection
Temp. Unit
Temperature deviation correction
Low temperature alarm threshold
High temperature alarm threshold
Enable temperature screening with infrared
Detection Management
08:50
Normal temperature
Measure Temp.
O
Temp.:
36.65 C
Mask Detected
Successfully verified
Name:Mike
User ID:4835
Verify:Face
08:50
Measure Temp.
Successfully verified
Name:Mike
User ID:4835
Verify:Face
Temperature over the range
O
Temp.:
37.65 C
Without mask
L
