SBTL8000 series installation guide
1
1
Preparation
1.
Tools:
a measuring tape, an adjustable wrench, an impact drill and a small screwdriver (included
in the package).
2.
Material:
a PVC anti-fire and insulation tube (diameter≥25mm), standard three-core power
extension wire,
tether cable (random configuration), M12 expansion screws (included in the
package).
3.
Thread the connection wire of the device through the tube before assembly.
4.
The power and signal wires should be set separately to easily distinguish strong and weak power.
Please invite professional personnel to complete the wiring. The device must be connected to
the ground.
Below is the outline and dimensions of SBTL8000:
Figure 1-1
