SBTL7000 Series
User Manual
P a g e
| 15
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
15.
Authentication in lane (15EXXX)
Allow pedestrian verfication during IR sensor triggered.
(15E000) Allow (default)
(15E001) Forbidden
16.
Volume Setting (16EXXX)
Adjust the volume of the device. The larger the number is set, the louder the volum. The valid
value for Volume Setting can be set between 1 to 100 and the default value is 40.
17.
Close Alarm Tone (17EXXX)
(17E000) Close
(17E001) Open (default)
18.
In/Out Exchange (18EXXX)
(18E000) Right in, left out (default)
(18E001) Right out, left in
You can switch the direction of the entrance and exit.
19.
Stay Duration Time (19EXXX)
Set the duration of stay in the channel after successful verification. The valid value for Stay
Duration Time can be set between 5 to 30 seconds and the default value is 10s.
20.
Force Adjustment (20EXXX)
The larger the number, the greater the efficiency of the gate opening and closing force, the valid
value for Force Adjustment can be set between 10 to 60 and the default value is 40.
21.
Fire Opening Direction (21EXXX)
The different Fire Opening Directions are as follows: -
(21E000) Right opent (default)
(21E001) Left open
22.
Clutch Start Angle (22EXXX)
Set angle at which clutch starts, the larger the number, the bigger the angle. The valid value for
Clutch Start Angle can be set between 0 to 99 and the default value is 0.
23.
Clutch Alarm Setting (23EXXX)
(23E000) Delayed unlock (default)
(23E001) Authentication to unlock
