SBTL5000 series installation guide
1
1
Overview
1.1
Preparation
A.
Tools
: measuring tape, adjustable wrench, impact drill and small screwdriver
(included in the package).
B.
Material
: PVC anti fire and insulation tube (diameter≥25mm), Standard three-core
power extension wire, M12 expansion screw (included).
C.
Put the connection wire of devices into tube before laying them underground.
D.
Power wire and signal wire should be set separately for distinguishing strong and
weak power. It is recommended that the wiring is to be done by a professional, and
the device must be connected to the ground.
SBTL5000
installation holes and cabling positions as shown in Figure 1-1:
Figure 1-1
