detected, the system will automatically open the barriers and stop actions until it is powered off to restart.
If the detected fire protection signal is a continuous level signal, the value is set to 2. Once this continuous
high-level signal is detected, the system will automatically open the barriers and then wait until this
high-level signal disappears. After this signal disappears, the system automatically closes the barriers and
falls into the normal working mode.
Option 15 can be used to set the self-testing mode of the system. If the value is set to 1, the system will
enter the automatic testing mode. Under this mode, the system automatically figures out the parameters
such as the inertia of the swing arm.
1.7 Product related parameters
Dimension(mm)
SBTL2000 : L=1200,
W=280,
H=1000
SBTL3000 : L=1500,
W=260,
H=1000
Communication Interface
RS485
Input voltage
AC100-120V/200-240V,50-60Hz
Input control signal
Switching
signal
output voltage
DC 24V
Time of opening/closing
0.6S(adju
stable)
Relative
humidity
5%-10%
temperature
-28
℃
-60
℃
Pass speed
RFID
：
Maximum 42/minute
Fingerprint
：
Maximum 35/minute
Face
：
Maximum 11/minute
Vein
：
Maximum 23/minute
Infrared sensor
6
Working
environment
indoor/Outdoor
Summary of Contents for SBTL2000
Page 14: ...12 ...
