RevFace15
User Manual
P a g e
| 54
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
2.
Face AE and Multi-face identifying are mutually exclusive options. When the Multi-face identifying
feature switch is turned on, the Face AE switch will be automatically turned off. If you turn on Face
AE at this time, the recognition mode will change to single face recognition mode.
3.
The Face comparison interval and Tracking identification are mutually exclusive options. If the
Tracking identification switch is turned on, the Face comparison interval function in the Face
Identifying Settings will be disabled, and vice versa.
Process to modify the Facial Recognition Accuracy
On the
System
interface, tap on
Face
>
Anti-Spoofing
Settings
and then toggle to enable 2D
Monocular Anti-Spoofing and 2D Binocular Anti-Spoofing to set the anti-spoofing.
Then, on the
Main
Menu
, tap
Auto-Test > Test Face
and perform the face test.
Tap three times for the scores on the right upper corner of the screen, and the red rectangular box appears
to start adjusting the mode.
Keep one arm distance between the device and the face. It is recommended not to move the face in a wide
range.
Detection Management
8.4
Tap
Detection Management
on the
System
interface to configure the Detection Management settings.
Function Description
Function Name
Description
Enable Mask
Detection
It enables or disables the mask detection function.
When enabled, the device identifies whether the user is wearing a mask or not
during verification.
