![background image](http://html1.mh-extra.com/html/zkteco/pa10/pa10_quick-start-manual_3971820002.webp)
Palm Sensor
Before the installation, please connect the cables to the connectors.(Recommended installation
height: 1.1m)
1) Post the installation template on the wall and drill. 2) Fix back plate to the wall
.
3) Mount the device on the back plate
4) Secure the device and back plate
.
.
1
93.0mm
246.5mm
51.13mm
45mm
1 Overview
Front
Side
Fingerprint Sensor
2.4 Inch TFT LCD
Keypad
Door Bell &
Indicator
LED
2 Installation of Wall-mount
Back
Bottom
7
(Beep/
/Weigand In/
PIN
LED
Power Out)
8
(
/
232/Weigand Out)
PIN RS485 RS
2
(Power In)
PIN
6PIN (Alarm/Lock/Exit Button/
Sensor/Bell/
)
Auxiliary In)
Tamper Alarm Button
6PIN RS485 RS
(
/
232/Weigand Out)
Ethernet Port
USB Slot
Reset Button
Speaker
Star-shaped screw hole
for xing device to the
back plate
3
Cautions
3
Cautions
1 Power cable is connected after other wirings and shut down the power rstly when making
)
,
,
some necessary checking.
2 We recommend that use the
C12V 3A power supply
)
/
.
D
)
.
3 Please read the terminals description carefully and wiring by rule strictly
)
4 Please connect the ND before other wirings especially under the serious electrostatic
G
environment.