MultiBio700- User Manual
eSSL Pvt. Ltd.
Page 67
The auto test enables the system to automatically test whether functions of various
modules are normal, including the screen, sensor, voice, face, keyboard and clock
tests.
1. Test Screen
: The device automatically tests the display effect of the color TFT
display by displaying full color, pure white and pure black and checks whether the
screen displays properly. You can continue the test by touching the screen or exit it by
pressing [Exit].
2. Test Fingerprint
: The device automatically tests whether the fingerprint sensor
works properly by checking whether the fingerprint images are clear and acceptable.
When the user places his/her finger on the sensor, the collected fingerprint image is
displayed on the screen in real-time. Press [Exit] to exit the test.
3. Test Voice
: The device automatically tests whether the voice files are complete and
the voice quality is good by playing the voice files stored in the device. You can
continue the test by touching the screen or exit it by pressing [Exit].
4. Test Face:
The device automatically tests whether the camera works properly by
checking whether the collected face images are clear and acceptable. Press [Exit] to
exit the test.
5. Test Keyboard:
The device tests whether every key on the keyboard works
normally. Press any key on the [Keyboard Test] interface to check whether the pressed
key matches the key displayed on screen. The keys are dark-gray before pressed, and
turn blue after pressed. Press [Exit] to exit the test.
6. Test Time
: The device tests whether its clock works properly by checking the
stopwatch of the clock. Touch the screen to start counting, and touch it again to stop to
check whether the counting is accurate. Press [Exit] to exit the test.
7. Screen Calibration:
You can perform all the menu operations by touching the screen
with one of your fingers or a touch pen. When the touch screen is less sensitive to the
touch, you can perform a screen calibration through menu operations.
