798mm
7
0
.0
0
m
m
3
4
7
.5
5
m
m
9
5
0
.0
0
m
m
540.00mm
720.00mm
320.00mm
100.00mm
It is recommended that the tripod turnstile must be installed on a horizontal solid platform with a
height of 50mm to 100mm.
1.
After installation, check if the connection has been done correctly at the connecting points of the
ground wire, at the connector assemblies and wiring points of the circuits, as well as at each movable
part of the tripod turnstile. Any loose nuts, screws and other fasteners should be tightened in time to
avoid any failures caused by long-time operations.
4.
1
1 Installation Requirements
3.
Make sure the ground wire of the system is reliably connected to avoid personal injuries or other
accidents.
2.
It
is
also
recommended
that
the
tripod turnstile
should
not
be
used
in
the
corrosive
environment
.
The installation position of the tripod turnstile depends on its size. A distance of 100mm between the tripod
turnstile and the wall needs to be reserved for ease of opening the top lid of the turnstile to perform
maintenance and adjustment. The reference figure is shown below:
2 Installation Environment
62mm
