mTS1000 Series Tripod Turnstile
User Manual
P a g e
| 15
Copyright©2021 ZKTECO CO., LTD. All Rights Reserved.
Press the button once to raise the arm lever. Then the inbound and outbound
sides are controlled by the tripod turnstile. The identity verification becomes
invalid, and no pass is allowed.
Press a button once to restore the default inbound and outbound identity
verification pass mode of the arm.
2. Combined functions:
Status
Description
Inbound free,
Outbound control
Press "
" twice
to open the tripod turnstile on
both sides. The
inbound side is free to pass without identity verification and can pass by
identity verification from the outbound.
Inbound control,
Outbound free
Press "
" twice
to open the tripod turnstile on
both sides. The
outbound side is free to pass without identity verification and can pass by
identity verification from the inbound.
Inbound free,
Outbound free
Press "
" and "
" at the same time
to open the tripod turnstile
on
both sides and both inbound and outbound sides can pass freely
without identity verification.
Inbound forbidden,
Outbound free
First press "
" once, and then press "
" once, then the inbound
side is forbidden to pass, and the outbound side is free to pass without
identity verification.
Inbound free,
Outbound forbidden
First press "
" once, and then press "
" once, then the outbound
side is forbidden to pass, and the inbound side is free to pass without
identity verification.
Inbound control,
Outbound forbidden
First press "
" once, and then press "
" once, then the outbound
side is forbidden to pass, and the inbound side needs to identity
verification to pass.
Inbound forbidden,
Outbound control
First press "
" once, and then press "
" once, then the inbound
side is forbidden to pass, and the outbound side needs to identity
verification to pass.
The wired remote control is connected to the controller, then set the controller's code pairing mode
to complete the wired remote control’s setup.
