Megapixel IP Camera with 4CH NVR Kit
2
1.3.1 Connecting the MD532 to the Internet
1.3.2 Connecting the Access Device to the Internet
(The following takes F7 as an example.)
1.
Reset Key
2.
Network Interface
3.
Power Interface
4.
DV 12V
5.
Network Cable
6.
Switch
Ⅰ
. Connect the power cables and power on the MD532.
Ⅱ
. Connect the MD532 to the switch by using network
cables for Internet access.
Ⅰ
.
Install the access control device (F7) and power on it.
Ⅱ
. Connect the F7 to the switch by using network cables
for Internet access.
Notes
:
(1)
Installation of access control device is required only if
the suite contains an access control device.
(2)
For the suite of standard configuration, the F7 access
control all-in-one device is used. However, the following
access control products are also supported: F8, F18,
MA300, TF1700 and F9.
Summary of Contents for MD532
Page 17: ......