Megapixel IP Camera with 4CH NVR Kit
10
2.2.2 Setting for Linkage between Access Control and Video
(Note: That this operation is required only when the suite contains an access control device.)
You can set alarm linkage for the video device and access device to implement linkage between access control and video.
The detailed operation procedure is as follows:
2.2.2.1 Alarm Linkage Setting
1
. In the
Access Management
window, double-click the camera in the
Video Device List
.
2
. In the
Access List
, select the access device requiring alarm linkage, as shown in the following figure.
3
. Click
Save
. A prompt as shown in the following figure will display.
Summary of Contents for MD532
Page 17: ......
