ZKTeco KF1000 Series, User Manual

Page: 15 / 43

KF1000 Series User Manual
P a g e | 14 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
2.2.3 DM10 Wiring
Figure 1-4 DM10 Wiring
Notes:

The DM10 can only be used in software if it is connected to the KF1000 series
via RS485.

You need to manually enable the DM10 function on the Webserver to access
it. It can be turned on via the following path:
[Advanced Settings] > [Serial
Comm] > [Serial Port] > [DM10] .

Set the 485 address of DM10 to 1.

A KF1000 series only supports connecting one DM10.

Each device requires a separate power supply.

The DM10 can be extended to connect the smoke detector, Wiegand Reader,
Door Sensor, Exit Button and Alarm.