ZKTeco G4[QR] Instructions Manual Download Page 72

Page: 72 / 77

G4[QR]

User Manual

P a g e

| 72

10.10

Auto-testing

•

On the

System Settings

interface, tap on

Auto-Testing

to enter the auto testing interface.

Function Descriptions

Menu Options

Function Description

Screen Testing

It is used for testing the screen's display. The screen will display red, green,

blue, white, and black tests.
Check if the screen color is uniformly correct across each area of the screen.

Tap on anywhere on the screen during testing to continue testing. Tap on

the back key to exit testing.

Voice Testing

The device automatically tests audio prompts by playing back audio files

that are stored in the device.
Voice testing mainly test if the device's audio files are complete and if the

audio effects are in good working order. Tap on the back key to exit testing.

Fingerprint
Testing

It is used for testing if the fingerprint scanner is functioning properly. Check

whether fingerprint image is clear and usable.

Camera Testing

It is used for testing if the camera is functioning properly. Check captured

image to see if the image quality is clear and usable.

Summary of Contents for G4[QR]












































































Search results

Summary of Contents for G4[QR]

Reviews:

Related manuals for G4[QR]

Brands by name

Popular brands

ZKTeco G4[QR], Instructions Manual

Search results

Summary of Contents for G4[QR]

Reviews:

Related manuals for G4[QR]

Brands by name

Popular brands