ZKTeco G4[QR] Instructions Manual Download Page 58

Page: 58 / 77

G4[QR]

User Manual

P a g e

| 58

10.3.1

Camera Mode

This function facilitates to set the conditions like whether it is required to save the photos and the
attendance records after once the device captures the photo of the personnel.

•

Tap on the required

Camera Mode

that you would like to configure:

•

On the

Camera Mode

interface, the users can set whether to take photos and save photos

during user access verification. The settings are applicable to all users.

Function Descriptions

Function

Description

No photo

If this mode is selected, the device does take photos during

authentication.

Capture photo

and save:

If this mode is selected, the device takes users’ photos and save

photos during authentication.

Save after
successful
verification:

If this mode is selected, then when the user passes the verification,

the photo is taken, and then photo is saved.

Save after

failed
verification:

If this mode is selected, the device takes a photo when the user fails

verification and save it.

Summary of Contents for G4[QR]












































































Search results

Summary of Contents for G4[QR]

Reviews:

Related manuals for G4[QR]

Brands by name

Popular brands

ZKTeco G4[QR], Instructions Manual

Search results

Summary of Contents for G4[QR]

Reviews:

Related manuals for G4[QR]

Brands by name

Popular brands