ZKTeco G4[QR], User Manual

Page: 76 / 122

G4[QR] User Manual
P a g e | 76 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
10.1.1 Ethernet Settings
When the device needs to communicate with a PC via Ethernet, the network must be set up to
make the device and the system in the same network segment. When the device is not connected
to the network, tap on
[TCP/IP Settings] on the “Network Settings” interface. The following page
will display:
Menu Function Description
Enable Ethernet
Switch
Enable to modify the Ethernet Network Address parameters. If this is not
enabled, users cannot modify the Ethernet Network Address parameters.
DHCP
Enable DHCP to assign an IP address to the internal network or network
service provider. If DHCP is on, you cannot manually set the IP of the device.
IP Address The default IP is 0.0.0.0 (can be changed).
Subnet Mask
The default IP is 0.0.0.0 (can be changed).
Gateway Address The default IP is 0.0.0.0 (can be changed).
DNS
The default IP is 0.0.0.0 (can be changed).
TCP COMM Port
The default TCP port is 4370 (can be changed).
Note
When the device is not connected to the network, the parameters such as IP
Address and Subnet mask are 0.0.0.0. When the device is connected to the
network, the parameters such as IP Address and Subnet mask are
automatically displayed as set values.