ZKTeco G4 Pro Series User Manual Download Page 31

Page: 31 / 114

G4 Pro Series

User Manual

P a g e

| 31

Procedure to set for Combined Verification Mode



Combined verification requires personnel to register all the different verification method.

Otherwise, employees will not be able to successfully verify the combined verification process.



For instance, when an employee has registered only the face data, but the Device verification

mode is set as “Face + Password”, the employee will not be able to complete the verification

process successfully.



This is because the Device compares the face template of the person with registered verification

template (both the Face and the Password) previously stored to that Personnel ID in the Device.



But as the employee has registered only the Face but not the Password, the verification will not

get completed and the Device displays “Verification Failed”.

Summary of Contents for G4 Pro Series


















































































































Search results

Summary of Contents for G4 Pro Series

Reviews:

Related manuals for G4 Pro Series

Brands by name

Popular brands

ZKTeco G4 Pro Series, User Manual

Search results

Summary of Contents for G4 Pro Series

Reviews:

Related manuals for G4 Pro Series

Brands by name

Popular brands