Facial Capture & Identification Camera Series Configuration Manual
23
Function
Instruction
Detect Rule Enable
After checking the "detection rule enablement", the system will turn on the
intelligentfacedetectionfunction.Ifthisfunctionisnotturnedon,all
related functions of smart face will not beused.
Snapshot Enable
After checking "Capture Enables", the system will turn on the facial
capturing function.
Record Enable
When "Video Enabling" is checked, alarm will be generated when the face
picture is captured, and the system will automatically record the video.
1. Preview time: When the alarm starts, the alarm video will be
prerecorded for a period of time. Customers can set the time according to
their needs.
2. Delay time: When the alarm is over, the alarm video will be extended for
a period of time before stopping. Customers can set the time according to
their needs.
Relay-out Enable
After checking the "alarm output enablement", the alarm linkage output
port will be activated. When the alarm is generated by capturing the
face picture, the system can link the corresponding alarm output
device.
1. Delayofalarmoutput:When thealarmisover,thealarmisextended
for a period of time to stop.
2. Alarm output channel: At present, one channel is supported for alarm.
When the alarm output is enabled, thealarm output channel 1will be
automatically checked.
Regional Config
After clicking the Redraw button, the face detection area can be drawn.
Use the left mouse button to click on the left side of the preview window
and drag the mouse to delimit the detection area.
