FBL6000 Pro series installation guide 1
1 Material preparation
1.
Tools:
A measuring tape, an adjustable wrench, an impact drill and a small screwdriver (included
in the package).
2.
Material:
Fireproof PVC and insulation tube (diameter ≥25mm), standard three-core power
extension wire, M12 expansion screw (included in the package).
3.
Thread the wires through the insulation tube before laying them underground.
4.
Power wire and signal wire should be kept separately to avoid interference between strong and
weak power. It is recommended that the wiring is to be done by a professional. And the device
must be connected to the ground.
Below is the reference to FBL6000 Pro cabling.
Figure 1-1
