Installation and Network Configuration
11
4.
Please use the power (
voltage 24V AC and rating current no lower than 2A
)
provided by the factory for the cameras. Much higher or lower voltage and
direct current power may cause the camera failure.
5.
Use the standard power cord when the power supply is too far away from the
camera, and consider the voltage drop caused by long distance.
6.
Read through the instructions for connecting terminal and wire strictly
according to interfaces. Any damage to the camera due to improper operation
will be disqualified from the guarantee.
7.
All the exposed parts of connecting terminal should not exceed 5mm, in order
to prevent any accidental contact from damaging the camera.
Uncovered cable should be less than 5mm
8.
Mount the relay equipment in the middle to avoid signal attenuation when the
straight communication distance from the camera to the incoming equipment
exceeds 80m.
Please use repeater when exceeding 80m
Summary of Contents for ZKSD3 Series
Page 4: ......
