201 Circle Drive N, Suite 116 Piscataway, NJ 08854 Tel: 732-412-6007 Fax: 732-412-6008
www.zkaccess.com
S50/S70
This window is used to do operations for the cards. It consists of read card, write card, and card number.
Read card:
it includes the access model control (Idle and All, KeyA and KeyB), number of blocks (that is
the number of blocks to be read, the range is 01-04), the start address of the blocks to be read (the
range: hex 00-3F, that is, from 00 block to 63 blocks), the six bytes block key. This operation can be set
as ‘Auto’.
Write card:
it includes the access model control (Idle and All, KeyA and KeyB), number of blocks (that is
the number of block to be written, the value range is 01-04), the start address of the blocks to be written
(the range: hex 00-3F, that is, from 00 block to 63 blocks), the six bytes block key, the data for write to
the card. This operation can be set as ‘Auto’.
Card number:
the modes to search card includes the idle model (one time do operations for only a
card) and the all mode (one time do operations for several cards). Halt is the sign to do operation for
card. No Halt is the sign not to do operation for card. When the card is done by the Halt operation
already, system cannot
finish searching card under Idle mode. While under All mode, Halt don’t affect
the card operation and system can search card. The above operation, please make sure the card is
always operated in the antenna range.
The left window of read and write status displays the card numbers and the communication process.
