Lock Connection
14
Important Notes:
InBio is set to supply lock power by default from built-in
power supply , If you want to use external power supply ,
you must take the following steps
1. Take apart the cover of inbio460
2. Select the desired lock relay and find its jumpers
3. Take off the jumpers and change to
4. Connect the lock as shown in the diagram below.
Steps:
Inbio460
Detach from Rail
Remove Top Cover
Lock Relay
Terminals
Default Setting
Changed Setting
Jumpers
FR107
GND
12V DC
SEN SEN GND
12V DC
5
1
1
5
5
1
1
5
Connecting a Lock with External Power supply
Switching Wet Contact to Dry Contact
