ZK Technology iClock 2500 Manual Download Page 96

Page: 96 / 96

iClock_ v6.1

3, the battery has vent fluid, electrolysis also caused eye, skin or

clothing, immediately wash with water flow, or seek immediate medical

assistance;

4, please correct for battery installation and dismantling, otherwise it

will affect the performance and battery life.

Caution

：

There are dangers of battery exploding, leak, fever, fire, break if

you don

’

t read the notice carefully.

Do not put the battery into water or let it to get wet.

Do not use and store battery near heat-generating device

( such as fire or heater).

Please use original charger only.

Do not inverse polarity connection.

Do not throw batteries into fire or hot battery. Do not use wire

or other metal short the positive and negative terminal, donot transit or

storage it with necklace, barrette and other metal object.

Do not break battery cause short-circuit battery

Dropping a battery may cause a strong physical shock that

may damage the performance of the battery

Summary of Contents for iClock 2500

































































































Search results

Summary of Contents for iClock 2500

Reviews:

Related manuals for iClock 2500

Brands by name

Popular brands

ZK Technology iClock 2500, Manual

Search results

Summary of Contents for iClock 2500

Reviews:

Related manuals for iClock 2500

Brands by name

Popular brands