24
● Put the two buckle tongues together and insert into the buckle until you hear
a “click” sound. (Figure 8)
● Draw the adjusting strap forwardly to fasten the harness system(Figure 9 j).
Caution:
The proper tightness is one finger space between the safety belt and
the child’s body. Correct position of the buckle is ate the crotch of the child not
his/her belly.
EN
5.4 Adjusting the shoulder strap level
● Remove the straps from strap con
-
necting plate (Figure 10 l). Detach the
shoulder strap from the connecting
clamp.
● Pull out and re-install the belt and
shoulder straps in the slot at appro-
priate level. (Figure 11)
● Make sure the shoulder belt is even
and a little bit lower than the child’s
shoulders. (Figure 12)
