5EVM-D · Electric Vehicle Home AC Charging Station
11
M5EVMD2011I
5EVM-D: Electric Vehicle Home AC Charging Station
© ZIV APLICACIONES Y TECNOLOGÍA, S.L.U. 2020
5.
Operation
The recharging points, depending on the model, have some or all of the functionalities
described below.
5.1
EV Charging
This is the basic functionality. All of the family's recharging points offer vehicle recharging in
mode 3 (according to IEC61851-1).
The equipment informs of the recharge status by means of display and LED lighting.
Charging process:
1. To start a charge, check that the device is Available: LEDs are lit in fixed green and the
display shows the
Default Screen
.
2. Pass a RFID card in front of the reader: the LEDs flash yellow and the display shows
STARTING SESSION
. After a few seconds, the LEDs turn to fixed white and the
display shows Main Menu without load:
CHARGE NOW / PROGRAM CHARGE /
CONFIGURATION / GENERAL.INFO
.
3. Select
CHARGE NOW
. The LEDs will now flash yellow and the display will show
PLUG CONECTOR
.
4. Connect the hose. Charging begins immediately: LEDs turn to fixed blue and display
shows "
Energy
", "
Power
", "
Time
" (if there is no consumption the LEDs are blue
flashing).
5. To end the session, pass the same RFID card through the reader: the LEDs turn to
fixed white and the display shows the Main Menu during charging:
STOP CHARGE /
CONFIGURATION / GENERAL.INFO
.
6. Select
STOP CHARGE
: the display shows the
SUMMARY SESSION
("
Energy
”,
“
Time
”), LEDs fixed white.
7. Disconnect hose. After 30 seconds, the device is available again: fixed green LEDs
and
Default Screen
.
5.2
Authorized Use
The charging point is configurable so that it can only be used if the user has previously
authenticated. There are, depending on the model, different types of authentication:
-
RFID card
. The user has a unique RFID card. By passing this card through the reader of
the equipment, the user is authenticated and can use the equipment.
-
Bluetooth
. User authentication is performed in the synchronization of the mobile
application.