© 2015 UTC Fire & Security. All rights reserved.
1 / 4
P/N 10-4211-501-ZX01-01 • ISS 26JAN15
ZX832-3 Addressable Optical/Heat
Multisensor Installation Sheet
1
2
3
4
EN: Installation Sheet
Description
The ZX832-3 Addressable Optical/Heat Multisensor integrates
both high sensitivity smoke and thermal sensors, resulting in
higher detection certainty. See Table 1 for a list of models. For
a complete list of sensing profiles refer to Table 2.
Table 1: Models
Number
Description
ZX832-3P
ZX832-3B
ZX832-3S30
Addressable Optical/Heat Multisensor, Polar White
Addressable Optical/Heat Multisensor, Black
Addressable Optical/Heat Multisensor, Chubb
Figures
Figure 1: Inserting a detector
Figure 2: Position of the locking tab
Figure 3: Removing a locked detector
Figure 4: Setting the address
Installation
Note:
For general guidelines on system planning, design,
installation, commissioning, use and maintenance, refer to the
EN 54-14 standard and local regulations.
To install a detector:
Insert the detector head into the mounting base and rotate it
clockwise until it clicks into place (Figure 1).
The detector may be locked into the mounting base if required.
To do this, remove the locking tab before installation shown in
Figure 2.
