Ziton ZR4ST-3, User Manual

Page: 14 / 23

SURVE
YOR
DE
VICE
LOC
AL - REM
OTE
PASS / F
AIL
SIGNAL QU
ALIT
Y %
REM
OTE - L
OC
AL
BA
TT
ER
Y
>31dB >31dB Pass
100% 98% 0001
SURVEYOR
DEVICE
LOCAL - REMOTE PASS / FAIL
SIGNAL QUALITY %
REMOTE - LOCAL
BATTERY
Setting up comms
Surveyor Vxx.xx
CH 1 CH 2 CH 1 CH 2
RSSI/dB
START
LOCAL - REMOTE
Step By Step Guide - Ziton System Survey
Surveyor
in RLM
position
Step 1.
Position the Signal Surveyor in the proposed RLM location.
Step 2.
Turn on the Signal Surveyor.
Step 3.
Record the background level displayed, for future reference.
Refer to the Using the Signal Surveyor section for more
information.
Step 4.
Turn on the Device Survey Tool.
Step 5.
Position the Device Survey Tool against the wall or ceiling in
the positions of the proposed Wireless device.
Step 6.
Record the signal level.
Step 7.
Repeat Steps 5-6 for all device positions associated with the
RLM position.
Steps
5 to 6
Note: a Ziton RLM Survey Form is supplied on page 15.
CH 1 CH 2 CH 1 CH 2
POWER/
CHARGE
TX
RX
RSSI/dB
START
LOCAL - REMOTE REMOTE - LOCAL
©2015 EMS Security Group Ltd. All rights reserved. Page 13 of 24 TSD256 (Iss 6) 26/10/15 AJM www.acornfiresecurity.com
www.acornfiresecurity.com