Ziton ZP1-X3E Series, Operation Manual

Page: 11 / 36

ZP1-X3E Series Operation Manual 7
Item Control/LED LED colour Description
12 Reserved for future
use This LED-switch position is reserved for future
use.
13 Expansion I/O
Fault/Disabled LED Yellow Indicates that an installed expansion board has a
fault or is disabled. Expansion boards are
optional.
A flashing LED indicates a fault. A steady LED
indicates a disablement.
Consult your system installer to determine
whether your system has expansion modules
installed.
14 General Disable
button and LED Yellow Disables a system feature or device (when
pressed with the corresponding button).
The disablement of some devices requires
pressing the button for more than 3 seconds.
(See “Disabling other extinguishing devices” on
page 25 for further details.)
A steady General Disable LED and the
corresponding feature or device yellow LED
indicates a disablement.
15 General Test button
and LED Yellow Tests a system feature or device (when pressed
with the corresponding button).
Testing of some devices requires pressing the
button for more than 3 seconds. (See “Testing
other extinguishing devices” on page 26 for
further details.)
A steady General Test LED and the
corresponding feature or device yellow LED
indicates a test.
16 Low Pressure LEDs Yellow Indicates the pressure status of the extinguishing
agent container.
A flashing upper LED indicates that the pressure
in the extinguishing agent container is low (the
General Fault LED also flashes).
A flashing lower LED indicates an open or short
circuit wiring fault. A steady yellow LED indicates
a disablement or test.
17 Extinguishing Agent
Flow LEDs Red/Yellow Indicates the extinguishing agent flow status.
A steady red LED indicates that the extinguishing
agent was released out of its container and into
the extinguishing area.
A flashing yellow LED indicates an open or short
circuit wiring fault. A steady yellow LED indicates
a disablement or test.