PANEL COMPATIBILITY
BOARD OVERVIEW
Top view:
There are four 41pin FI-RE41HS connectors, labeled INPUT 1~4. Additionally, there is an 8pin
PH2.0 connector on the left edge of the board, labeled “RGB STRIP”. This connection is intended for
use with the optional rear illumination package. A labeled JTAG interface on the left edge enables
firmware updates.
CONNECTOR PINOUTS
“UHD TCON for Innolux Panels” User Guide ZisWorks.com Page 5/11
PCB VERSION 1.1
RGB STRIP
FI-RE41HS PIN
SIGNAL NAME
1
POWER INPUT
2
POWER INPUT
3
2.5V
4
ENABLE
5
FRAME_SYNC
6
SERIAL_OUTPUT
7
GROUND
8
GROUND
PANEL COMPATIBILITY
M238DCJ-E50
23.8” 9.5ms AAS
WILL NOT WORK
M280DGJ-L30
28” 1ms TN
FULLY SUPPORTED
V390DK1-LS1
39” 6.5ms MVA
FULLY SUPPORTED
M315DJJ-K30
31.5” 9.5ms MVA
WILL NOT WORK
V420DK*
42” 9.5ms MVA
UNTESTED
V500DK2
50” 6.5ms MVA
UNTESTED
V580DK2
58” 6.5ms MVA
UNTESTED