Zirkon zahn ZIRCONFEN 600, Operator And Maintenance Manual, Page: 16 / 40

01 03 02
16 16 CHAPTER
SAFETY / RESIDUAL RISKS
EQUIPMENT’S TRANSPORT, UNPACKING AND SETTING UP
- 6JGVTCPURQTVOWUVDGECTTKGFQWVQPN[YKVJUWHſEKGPVRGTUQPPGNCEEQTFKPIVQVJGPCVKQPCN
industrial safety regulations.
- A forklift or a lift tray truck are recommended for the transport of the pallet (weight approx. 200 kg).
Caution when lifting!
- The Zirkonofen 600 & 600/V2 sintering furnaces have to be moved and put down on surfaces
with suitable stability, in a dry place and in a non-corrosive environment.
- Stable, non-slip installation surface, which can bear a minimum weight of 200 kg.
- CAUTION: Remove the packaging material in the upper and interior part of the combustion
chamber.
- Caution when removing the cardboard casing.
- Caution when unpacking and setting up the sintering furnace: risk of injury.
- Power supply must be installed and attached by an expert.
- The device must not be connected to the electric circuit during the installation phase: danger of
electric shock.
- The original packaging has to be kept for at least 1 year.
SAFETY PROCEDURES AT THE SITE OF THE INSTALLATION
- Stable, non-slip installation surface, which can bear a minimum weight of 200 kg.
- Safety distance of min. 2 m to combustible material.
- Safety distance of min. 2 m to water.
- Safety distance of min. 1.5 m to all sides (for cooling air, access).
- No objects must be placed on top of or beside the Zirkonofen 600 & 600/V2 sintering furnaces
ſTGJC\CTF