Zirkon zahn ZIRCONFEN 600, Operator And Maintenance Manual, Page: 14 / 40

14 14 CHAPTER
SAFETY / RESIDUAL RISKS
Technical development
Zirkonzahn is not required to make any technical amendments or improvements related to
subsequent design changes.
SAFETY REGULATIONS
Read and follow the safety instructions in this Operator’s and Maintenance Manual to avoid
danger to persons and damage to property.
;QWTUCHGV[EQOGUſTUV
Safety concept
The safety concept of the Zirkonofen 600 & 600/V2 sintering furnaces as well as this
Operator’s and Maintenance Manual were compiled according to the requirements of the
Machinery Directive 98/37/EC in force until 29 December 2009 and the Machinery Directive
2006/42/EC valid thereafter as well as the European Low Voltage Directive (LVD) 2006/95/ EC.
Personal safety equipment
When working with the Zirkonofen 600 & 600/V2 sintering furnaces, the following personal
safety equipment is required:
- Protective gloves.
Personal safety equipment required by law may vary from country to country.
The user is committed to use the safety equipment in accordance with the national
industrial safety regulations.
Safety measures when cleaning the device
- Safety goggles.
- Face mask.
- Protective gloves.
- Unplug from mains power!