Electronic Metal Detector with Wide Scan and
Pinpoint Scan
MetalliScanner
®
m
40 quickly and easily detects
metal in wood, drywall, paneling, tile, stucco,
plaster, concrete, and other non-metallic surfaces.
It locates ferrous (magnetic) metal up to 4 inches
(102 mm) deep and non-ferrous (non-magnetic)
metal up to 2 inches (51 mm) deep.
MetalliScanner
®
m
40 solves the very difficult
problem of finding studs in lath and plaster
walls. It works by finding the pattern of
nails that attach the wood lath to the studs.
MetalliScanner
®
m
40 finds plumbing, ductwork,
rebar, nails, and screws in your walls, floors,
and ceilings, and is great for scanning reclaimed
lumber for hidden metal.
MetalliScanner
®
m
40 has two scanning
positions, each with a progressive LED display.
As it approaches a metal object, the red LEDs
progressively light from the bottom up. The top
lighted blue coil and an audio tone indicate when
a metal target is located.
• Use Pinpoint Scan to locate small metal
objects such as screws and nails
• Use Wide Scan to detect metal in walls or
concrete
• LED arrays indicate signal strength
MetalliScanner
®
m
40
SPECIFICATIONS
Dimensions 7.65 in. L x 4.71 in. W x 0.98 in. H
(194 mm x 120 mm x 25 mm)
Weight
3.9 oz (111 g) without battery
Battery Type 9V alkaline (not included)
Depth*
½ in. Rebar: 4 in. (102 mm)
(First Light)
½ in. Copper pipe: 2 in. (51 mm)
Operating
20° to 105°F (-7° to 41°C)
Temperature
Storage
-20° to 150°F (-29° to 66°C)
Temperature
Humidity
5-90% RH non-condensing
Water
Splash and water resistant, not
Resistance waterproof
*NOTE: See tool's instructions for more information. Sensing depth
and accuracy can vary due to moisture, content of materials, wall
texture, paint, etc.
© 2017. MetalliScanner and Zircon are trademarks or registered trademarks
of Zircon Corporation • C/N 1865 Rev B 03/17
Zircon Corporation | 1580 Dell Avenue | Campbell, CA 95008 | [email protected] | www.zircon.com | 408-963-4550 | 800-245-9265
METAL FINDING
Scan for Metal
ZirconTV
ZirconCorporation
ZirconTools
ZirconToolPro
ZirconTools
