8
III. INITIAL ASSEMBLY
ASSEMBLING BATTERY UNIT (Figure 6. & 6.1)
• Lower the battery case into the trough and ensure that the electrode terminals are aligned.
• Loosen safety locking knob located directly behind the black seat post, turn the locking cap such that it
is centered over each side of the battery case, and then retighten the locking knob.
CAUTION!
Please always keep the battery case metal contacts (electrodes) clean. Dirty contacts can lead to the
malfunction of the batteries.
ASSEMBLING SEAT UNIT (Figure 7.)
• Lower the seat onto the chrome seat post
• Pull up on the seat-lock lever (located under the seat), adjust seat to the position, and release then
release the lever. The seat will lock into position.
• Insert the armrests into seat frame and tighten the armrest locking knobs located under the seat.
INSTALLING BASKET (Figure 8.)
• Lower the basket frame onto the basket bracket (pre-installed on the front of the tiller).
Figure 6.1
