background image

Check Box for These Contents 

In the event of missing or defective parts please call our customer service department at 

1 877 234 6196

(Mon. to Fri. 8:00 AM to 4:00 PM EST)

.

    1.  

Post Cap

 (1)

 

    2. 

 Post 

(1) - 2” x 3½” x 57”

    3. 

 Post Arm 

(1) - 4” x 4” x 23” 

 

    4. 

 Post Trim Cap 

(1)

    5. 

 Anchor Pipe 

(1) - 46¾” 

    6. 

 1/2” Self-Auguring Stainless Steel Screw 

(7)

    

Tools You Will Need

    •  Cordless Drill
    •  Level
    •  Hammer 

General Information

    • 

 Read Instructions through carefully before beginning assembly.

    •  When assembling components, place on a non-abrasive surface

         (i.e. shipping box) 

to avoid scratching. 

    •  We recommend an area approx 5’x 8’ for unobstructed assembling.
    •  You should not need to use excessive force when assembling components.

Rockport Vinyl Mailbox Post with

No-Dig Steel Pipe Anchor Kit

Please read through before starting assembly.

ASSEMBLY INSTRUCTIONS

1

6

Not to Scale

IMPORTANT:  CHECK THE INSIDE OF THE LARGER PIECES IN YOUR BOX FOR OTHER MATERIALS
PACKED INSIDE.

Ver 1.1/053015

1

4

2

3

5

Ground

55 3/8 in

42 in

17 in

4 3/4 in

3 1/2 in

2 in

4 in

*

*) Mailbox and mounting hardware not included

DO-IT-YOURSELF 

FRIENDLY PRODUCTS

Zippity

42 in

24 in

2234 in

4 in

Summary of Contents for Rockport






Reviews: