WWW.
ZIPPITY
-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS
ZP19024
Insert first Privacy Board
(G)
into
Horizontal Rail then insert the Privacy
Board into the U-Channel. Angle the
Privacy Board as illustrated. This will
make it easier to get the Privacy Board
into the U-Channel. Insert the last
Privacy Board in the same fashion.
Walk another Horizontal Rail down over the Privacy Boards starting with the first Privacy
Board as illustrated. Secure the Horizontal Rail to the Rail Brackets with (4) ¾” Steel Screws.
Repeat steps 5.1 through 5.4 to assemble the other wall panel.
Slide the middle Privacy Board in
vertically as illustrated.
STEP 5.2
STEP 5.3
Note:
Make sure
the Horizontal Rail
is inserted fully
over the Privacy
Boards and rests
inside the Rail
Brackets.
Tip:
Use liquid soap to allow tighter fitting materials
to slip together more easily if necessary.
G
STEP 5.4