6
Madison Vinyl Picket Gate Instructions
1
2
1
3
4
Assemble the Gate Wings
Orientate the posts so the tab is facing up as illustrated.
Insert the post down through the top and bottom horizontal
rails as illustrated.
Note that the underside of the bottom rail only has two holes
as shown.
Align the pre-drilled holes in the horizontal rails with the
pre-drilled holes in the vertical posts and fasten together with
FOUR short screws for the bottom rail and FOUR screws for
the top rail.
Insert a picket (numbered 1) down through the rop rail
and into the bottom rail.
Repeat for second gate wing.
STEP FOUR
2
3
Note the direction
of the spears.
Tab
