Assemble the Gate Frame
Orientate the posts so the tab is facing up as illustrated.
Insert the post down through the top and bottom horizontal
rails as illustrated.
Note that the underside of the bottom rail only has two holes
as shown.
Align the pre-drilled holes in the horizontal rails with the
pre-drilled holes in the vertical posts and fasten together with
FOUR short screws for the bottom rail and THREE screw for
the top rail.
Starting with one inside corner, place the corner bracket
against the horizontal and vertical posts as shown.
Fasten corner bracket with two short screws into the horizontal
rail.
Fasten with two more screws into the vertical posts.
Repeat for all four inside corners.
1
2
STEP ONE
1
3
2
3
3
Madison Vinyl Picket Gate Instructions
Note: Underside of bottom rail.
4
5
6
Align
4
5
Note: There is no screw
hole here.
Tab
