WWW.
ZIPPITY
-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19036
Note:
If your
ground is very
hard, the anchor
can be slid until
the bottom of
the anchor is
8” beyond the
bottom of the
posts.
STEP 3:
ASSEMBLE
FENCE PANEL
STEP 3.1
STEP 3.2
One by one, guide the
numbered pickets
(E)
through
the top and middle rails until
the pickets lock into place in
the bottom rail.
G
Pickets 1,2,3, etc...
1
2
4
3
5 6 7 8 7 6 5 4 3
2 1
1.
Slide the bottom rail over the post, aligning
the pre-drilled holes on the bottom rail with the
holes on the post.
2.
Insert the Post Anchors
(G)
6" into the bottom
of the post. 10" of post anchor should be visible.
3.
Use the 1/8" drill bit
(K)
to drill (4) total holes
in the post anchor through the pre-drilled holes
in the bottom rail.
4.
Drive (4) 3/4" self-drilling stainless steel
screws into the pre-drilled holes in the bottom
rail.
